Windows and Fieldbus Based Software Computer Numerical Control SystemWU Hongen~(1,2) ZHANG Chengrui~1 LI Guili~2 WANG Baoren~(1,2) (1.Mechanical School,Shandong University,Jinan 250061,China, 2.College of Mechanical and Electronic Engineering,Shandong University of Sci & Tech,Qingdao 266510,China)Computer numerical control(CNC)system is the base of modern digital and intelligent manufacturing technolo- gy.And opened its architecture and constituted based on PC and Windows operating system(OS)is the main trend of CNC sys- tem.However,even if the highest system priority is used in user mode,real-time capability of Windows(2000,NT,XP)for applications is not guaranteed.By using a device driver,which is running in kernel mode,the real time performance of Windows can be enhanced greatly.The acknowledgment performance of Windows to peripheral interrupts was evaluated.Harmonized with an intelligent real-time serial communication bus(RTSB),strict real-time performance can be achieved in Windows platform. An opened architecture software CNC system which is hardware independence is proposed based on PC and RTSB.A numerical control real time kernel(NCRTK),which is implemented as a device driver on Windows,is used to perform the NC tasks.Tasks are divided into real-time and non real-time.Real-time task is running in kernel mode and non real-time task is running in user mode.Data are exchanged between kernel and user mode by DMA and Windows Messages.software CNC;;Windows operating system;;real-time kernel;;real-time serial communication bus